2D Finish SS Sheets/Coils/Strips
Product Introduction
2D is a dull, silver gray and non-reflective finish which results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. It's widely used in the industry that may not concern the uniform of the finish.
AVAILABLE SIZES
| Grade | Type | Thickness | 750 | 914 | 1000 | 1219 | 1250 | 1500 | 1524 |
|---|---|---|---|---|---|---|---|---|---|
| 304/304L | COIL/SHEET | 0.3~6.0 | ● | ○ | ● | ● | ● | ● | ● |
| 316L | COIL/SHEET | 0.5~3.0 | ● | ○ | ○ | ● | ● | ● | ● |
| 430 | COIL/SHEET | 0.3~3.0 | ● | ○ | ● | ● | ● | ● | ● |
| 441 | COIL/SHEET | 0.3~3.0 | ○ | ○ | ○ | ○ | ○ | ○ | ○ |
- Regular coils are typically supplied with an inner diameter of 508 / 610mm
- Special dimensions was accepted on request
- Customized specific strip are acceptable
- Customized specific cut-to-length are acceptable
- PE/Laser PE/Optic Fiber Laser PE are available on request
